The Dragonfly Polyskimmer
Specifications
Each skimmer comes with the following additional polypropylene fittings to assist in smooth connection to existing infrastructure. Standard fittings are based in a 25mm (1") tubing. however this can be increased to 38mm BSP (1-1/2) if required.
1 standard 38mm BSP (1-1/2") outlet at base.
2 standard 38mm BSP (1-1/2") to 25mm 1" reducing bush.
3 standard 25mm, (1") male female 90 degree elbow.
4 standard 25mm, (1") threaded 150mm, (6") riser
5 standard 25mm,(1") female female 90 degree elbow.
6 standard 25mm, (1") threaded 150mm, (6") riser
7 standard 25mm, (1") female female riser union.
8 standard 25mm, (1") male thread to 25mm, (1") barb fitting.
Package is 360mm X 330mm X 220mm (15.2" X 13" X 8.7")
Total weight in package is approximately 5 kgs
All parts of the polyskimmer including additional pipes and fittings are made from polypropylene.
The floats are ballasted with ilmenite sand and are sealed with a 32mm (1-1/2) threaded polypropylene plug.
Polypropylene is resistant to most acids, caustic solutions, hydrocarbons, solvents, high temperatures and many other aggressive chemical solutions.
Floats are sealed with a non lead non toxic solder to avoid the possibility of any contamination to potable or irrigation water streams. This seal is also above the waterline
Polypropylene is the preferred material for fittings as this material is highly stable, safe in potable and irrigation water, is highly resistant to a great variety of chemicals as well as having a good resistance to high temperatures.
Polypropylene is suitable for use with potable water and water used in irrigation.
Width at its widest point 360mm
Total height including tube connections to the base 270mm,
Standard fittings reduce from 38mm BSP (1-1/2") to 25mm (1")
For North American enquiries please go to usaink.com/micro-oil-skimmer
link to Dragonfly Pulse Surface Cleaner the award winning floating swimming pool cleaner
