Each skimmer comes with the following additional polypropylene fittings to assist in smooth connection to existing infrastructure. Standard fittings are based on a 25mm (1") tubing. however this can be brought up to 38mm BSP (1-1/2") if required.
1 standard 38mm BSP (1- /2") outlet at base.
2 standard 38mm BSP (1-1/2") to 25mm 1" reducing bush.
3 standard 25mm, (1") male female 90 degree elbow.
4 standard 25mm, (1") threaded 150mm, (6") riser
5 standard 25mm, (1") female female 90 degree elbow.
6 standard 25mm, (1") threaded 150mm, (6") riser
7 standard 25mm, (1") female female riser union.
8 standard 25mm, (1") male thread to 25mm, (1") barb fitting.
Package is 360mm X 330mm X 220mm (15.2" X 13" X 8.7")
Total weight in package is approximately 5 kgs
The 316.SS, Stainless Steel Oil Skimmer
Specifications
Floats and frame are made from 316, Marine grade stainless steel and are sealed using only lead free aquasafe alloy and are ballasted with ilmenite sand.
All other fittings are made exclusively from Polypropylene.
316 stainless steel is resistant to caustic solutions, hydrocarbons, solvents high temperatures and many other aggressive chemical solutions.
Floats are sealed with a non lead, non toxic solder, helping to avoid the any contamination to potable or irrigation water streams. This seal is set above the waterline.
Polypropylene is the preferred material for fittings as this material is highly stable, safe in potable and irrigation water, is highly resistant to a great variety of chemicals as well as having a good resistance to high temperatures.
Width at its widest point is 350 mm (13..8 inches)
Total height including tube connections to the base 345 mm, (13.6 Inches)
Standard fittings reduce from 38mm BSP (1-1/2") to 25 mm (1")
For North American enquiries please go to usaink.com/micro-oil-skimmer
link to Dragonfly Pulse Surface Cleaner the award winning floating swimming pool cleaner